» » The Shippshape Bush Hut

The Shippshape Bush Hut


Wall package to add to the shack

Available on backorder




The ShippShape Bush Hut package is ideal for those quick setups and pack-downs with the added convenience of four (4) individual canvas walls to create a 2.100 x 1.400 living room for meals and privacy for changing, plus an awning to the side at 2.1 x 1.9.

The package simply adds the walls to The Shack (package 1 above) to allow for a medium sized enclosed room while retaining the side awning – an incredibly versatile package that can be purchased and added to the base tent at any time as all zippers and attachment points are in place at time of manufacture.

Standard mounting and wall height is 1950mm but will fit up or down by approximately 100mm. Any vehicle height outside this standard dimension we will make custom height walls at no extra charge.

A separate floor is available if required from our options list and easily fits into position.

All walls have either a large window or a door – all of which have canvas and mesh screens, so are perfect for allowing the breeze to flow through.

Each wall is individually added; so you can use just one, two, three or all four walls. This package has been tailored to suit the tourer or traveller for extremely fast setup and pack down, plus has the added advantage of adding the walls one at a time as required to act as privacy screens or wind / sun blocks.

The standard awning / wall still provides an additional awning as per The Shack, so you’ll have an enclosed room of 2.1m by 1.4m and an awning of 2.1m by 1.9m that can be quickly and easily set up and packed away by one person.

All extra walls and floor options can be stored under the travel cover during transit.


Basic tent measurements:
Length – 2100mm
Width – 1400mm
Height packed down – :250mm
Height set up inside tent – 1500mm
Weight – from 80 kg (The Shak) plus extras
Standard foam mattress inclusion – 2100 x 1400 x 120mm
Bed / sleeping area is enclosed with zip open canvas walls with large mesh window.
All bedding can be left in the tent when packed away.
Standard mounting height is 1950mm but will fit up or down by 100mm. Any vehicle height outside this standard dimension we will make custom height walls..
No fly is required over the tent for waterproofing – quality Australian canvas is used.
All 4 walls of tent automatically open vertically as standard to provide more sleeping space.
Tent opens to passenger side of vehicle.
Zips for front and rear awning are sewn in place during manufacture so awnings can be purchase at a later date if needed.
Ladder, poles and pegs included in pricing.
Extra walls, rooms and awnings come in there own carry bags.
​Bush Hut walls can be left attached when folding the tent away, but the Homestead room would make the job too hard to pack away so is best removed first.
Tent easily fits to either three cross bars or a flat canopy roof.
Fitting rails under bed base allow tent to be easily fitted to almost any vehicle or trailer regardless of rail spacing.


*Colours are Grey main tent and Navy Trim as standard.

*4 Week production.

Yes, we make these roof top tents in Australia with Australian canvas.